Autoclave LAC-1021SV LABTECH, Sterilization temperature 110°C to 135°C
STEAM STERILIZER / Autoclave LAC-1021SV LABTECH
FEATURE
Sterilization temperature 110°C to 135°C EN-13060-2 class B sterilization cycle
Pre Vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle
Pre-vacuum and post vacuum Drying system
Pre-vacuum for effective air removal that results in increasing sterilization performance
Post-vacuum for drying with remaining steam removal
Microprocessor PID program controller with self auto-tuned and LCD monitor
7 pre-programmed cycles as 2 wrapped, 2 unwrapped liquid, Bowie-disk and 1 user programmable.
Full automatic operation system
Easy operation with full automatic cycle by microprocessor, from beginning to end cycle.
Self-diagnostic and Safety system
In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety purpose
Air filtration cooling system
For the process of drying cycle, 0.2µm HEPA filtered clean air flows into the chamber in order to protect air contamination and cool down below 60°C
Flushing cycle sterilization system
Can be supplied as operational order
Safe and Efficient water supply system
Automatic water supply mechanism which supplies fixed volume of water to the chamber
for maximum efficiency
Automatic and manual door lock system
When the sliding handle is entered into the locking ring, the door automatically locks after two second.
The door can be manually opened and locked using the locking wheel system.
Space saving compact design
Maximize working capacity with square chamber and minimize foot space with dedicated engineering design.
SAFETY MECHANISM
Model: LAC-1021SV
STEAM STERILIZER / Autoclave LAC-1021SV LABTECH
FEATURE
Sterilization temperature 110°C to 135°C EN-13060-2 class B sterilization cycle
Pre Vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle
Pre-vacuum and post vacuum Drying system
Pre-vacuum for effective air removal that results in increasing sterilization performance
Post-vacuum for drying with remaining steam removal
Microprocessor PID program controller with self auto-tuned and LCD monitor
7 pre-programmed cycles as 2 wrapped, 2 unwrapped liquid, Bowie-disk and 1 user programmable.
Full automatic operation system
Easy operation with full automatic cycle by microprocessor, from beginning to end cycle.
Self-diagnostic and Safety system
In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety purpose
Air filtration cooling system
For the process of drying cycle, 0.2µm HEPA filtered clean air flows into the chamber in order to protect air contamination and cool down below 60°C
Flushing cycle sterilization system
Can be supplied as operational order
Safe and Efficient water supply system
Automatic water supply mechanism which supplies fixed volume of water to the chamber
for maximum efficiency
Automatic and manual door lock system
When the sliding handle is entered into the locking ring, the door automatically locks after two second.
The door can be manually opened and locked using the locking wheel system.
Space saving compact design
Maximize working capacity with square chamber and minimize foot space with dedicated engineering design.
SAFETY MECHANISM
- Over pressure release valve
- Over temperature protector with Thermostat
- Higher temp set protector by Digital high alarm limit
- Visible and Audible alarm system
- Automatic dual door locking system
Bench Top / Round Chamber
TECHNICAL SPECIFICATION
MODEL | LAC-1021SV |
Dimensions Inner (W x D x H mm) Outer | 490 x 655 x 460 270 x 405 x 230 |
Capacity | 25 Liter |
Heater | 2.5kW |
Chamber Type | Reinforced and Electro polished square chamber |
Material | Stainless Steel 304 standard (STS 316 L option) |
Door Lock Mechanism | Automatic wheel inter locking with one touch sliding handle |
Vacuum Pump | Built-in diaphragm vacuum pump 25 LPM capacity |
Controller | Microprocessor PID Program Controller with LCD Monitor |
Sterilization Temp. Range Pressure Range Course | 110°C - 135°C 0.4-2.3kgf/cm2 Unwrapped 1&2/ Wrapped 1&2/ Liquid/ Bowie-Dick/ User Program mode |
Reservoir | 6 L stainless steel tank with top water filling inlet and silicon closer |
Safety | Over pressure release valve, Over temperature Visible and Audible alarm system, Automatic dual door locking system |
Tray | 250 x 360 mm |
Wire tray (Standard) / Perforated tray (Option) | |
Electrical Supply | 110V, 60Hz or 220V, 50/60Hz |
