Unit water bath Thermominder SDN-B
Unit water bath Thermominder SDN-B
Addressed to low water of 45mm to fit to micro tube and small test tube. Optimum for examination.
Main Application
●Various incubation such as enzyme reaction●Inactivation of serum and thermal insulation of culture medium
●Hybridization
Features
Addressed low water level (45mm) enables safety thermal insulation of container
Using at low temperature level is optimum for small container such as micro tube. There is no risk of turning over test tube which has low level of content since tube is not floating.Safe working even at low water level |
Temperature setting using Up-Down key.
Up-Down key can set temperature in unit of 0.1ºC. Setting temperature and actual temperature are digital display.SDN-B can memorize three temperature settings.
SDN-B can memorize three temperature settings.Becomes moist chamber using heat-proof plastic hood
With optional heat-proof plastic hood RF-SDM, take advantage of addressing low water level by speeding up temperature rise by 10 min and preventing evaporation. Furthermore it can be used as moist chamber which is useful for in situ hybridization.Machine body and wetted surface material is stainless steel
This machine is durable and easy to maintain hygienically because machine body (except float switch) and wetted surface of attached thermal insulation tray B is made of stainless steel.Two types of different temperature regulation accuracy and with or without timer
There are two models; standard model of SDN-B and EXN-B with higher accurate temperature regulation by one digit and has ON-OFF timer. They are specialized thermo minder for attached thermal insulation tray B and shaking water bath personal .Specifications
Model | SDN-B |
Temperature Range | RT+5ºC - +70 ºC |
Temperature setting | -20℃ - +100℃ (*1) |
Temp. Control Accuracy | ±0.1℃ - 0.3 ºC |
Minimum temperature setting unit | 0.1ºC (setting and display) |
Flow | Jet blast |
Temperature Display | Digital display Setting temperature (top panel) and inside chamber temperature (side panel) |
Memory | three memory |
Heater | 800W |
Weight | Approx. 3kg (when using thermal insulation tray B: Approx. 6kg) |
Safety device / function | Circuit protector (15A), fuse (2A), float type prohibition of boiling while empty Misalignment high and low temperature error , lowing water, sensor error, auto tuning error, non-volatile storage error |
Dimensions | 280 x 109 x 215Hmm (when using thermal insulation tray B: 280 x 475 x 240Hmm) |
Power Supply | AC100V 8.5A |
Standard Accessory | Thermal insulation tray B ×1 (*2) |
(*1) Cooling machine such as "Cool pipe" is required for set below environmental temperature. Antifreezing solution is required for set below +7℃.
(*2) This production is specialized for thermal insulation tray B (inner Dimensions 235 x 430 x 140Hmm). Other water bath cannot be used.
(*2) This production is specialized for thermal insulation tray B (inner Dimensions 235 x 430 x 140Hmm). Other water bath cannot be used.