Unit water bath Thermominder SJ-07N
Unit water bath Thermominder SJ-07N
Standard types of Thermominder.
 Variations of water bath, hood and unit for use in low temperature is available. |
Main Application
●Various incubation such as enzyme reaction●Inactivation of serum and thermal insulation of culture medium
●Hybridization
Features
Addressed to use at below room temperature
Temperature setting range is -20ºC - +95 ºC for SJ-07N.Temperature control below room temperature enabled by combining with optional immersion cooler.SJ-07N has simple OFF timer and buzzer timer.
SJ-07N has simple OFF timer and buzzer timer.Regulating strong and weak agitation is possible
Equipped with volume control which can control water jet arbitrarily. It can prevent ruffle when using small water bath or small volume of water.A lot of options other than attached plastic water bath
It is possible to facile immediate use with attached poly C water bath or optimization with options for container and purpose.Specifications
| Model | SJ-07N |
| Temperature Range | RT+5ºC - +95 ºC (*) |
| Temp. Control Accuracy | from ±0.1ºC |
| Minimum temperature setting unit | 0.1ºC (setting and display) |
| Temperature setting | By UP/ DOWN key |
| Flow | Jet blast (volume adjust) |
| Temperature Display | Digital display (switching between setting temperature and inside chamber temperature) |
| Timer | Buzzer timer : 1min - 99h59min OFF timer : 1min - 99h59min |
| Heater | 700W (time proportioning variable output: 0-100%) |
| Weight | Approx. 3.4kg |
| Water level range | Minimum water level: 55mm (from the bottom of PolyC water bath) |
| Safety device / function | Circuit protector (10A), fuse (2A), float type prohibition of boiling while empty, protective cover for heater Misalignment high and low temperature error, lowing water, sensor error, auto tuning error, non-volatile storage error ※Notified by buzzer |
| Occupying dimensions inside bath | 130 x 66 x 135Hmm |
| Dimensions | 130 x 135 x 304Hmm |
| Power Supply | AC100V 7.5A |
| Standard Accessory | PolyC water bath ×1 (can be use at up to +70 ºC) , micro tube floater ×1 |
(*)Temperature setting range is -20ºC - +95 ºC for SJ-07N. Temperature control below room temperature enabled by combining with optional immersion cooler.
Dimensions
