Model: LCV-204GR
PHARMACEUTICAL REFRIGERATOR LCV-204GR LABTECH
FEATURE
Precise Temperature Control SystemMicroprocessor PID Controller ensures the most accurate temperature control and maintains cooled temperature during defrost cycle by unique designated technology
PC Software System
RS-232C / 485 interface to LIS / HIS requirement with monitoring software is supplied
Self-Diagnostic and Alarm System
- High / Low working room temperature Alarm
- Electric power failure Alarm
- Status of door opening warning Alarm
- Low battery for controller warning Alarm
- Operating temperature check in high and low
- Password locking system for set temperature
CFC/HCFC-free Hermetically sealed compressor and Natural Refrigerant gas are used for compliance with the New Environmental Regulation
IQ-OQ Documentation & Validation
Is provided on request as optional order
High-density Polyurethane foam Insulation
With 60mm thickness Insulation provides excellent low temperature and maintains cool temperature for a long time in case of power failure
Vacuum sealed Pair Glass Door
With embedded invisible heating film prevents viewing window from moisture condensation
Automatic Defrost and Dehumidify System
Unique air flow circulation and defrost provides high precision temperature uniformity and stability
User Friendly Design
- Built-in Fluorescent lamp with ON/OFF switch and circulation fan stops while door is opening
- Door key Lock device and password lock for safety
- Drawer shelf provides easy storage blood bags with triple sliding rail mechanical system
Magnetic packing with adjustable tension Door
Magnetic packing with adjustable enforced tension door prevent cold temperature from any air leakage
Pt – 100Ω RTD Sensor is built-in liquid bottle
Provides the exact temperature control for blood bank
TECHNICAL SPECIFICATIONS
MODEL | LCV-204GR |
Dimensions Inner (W x D x H mm) Outer | 1140 x 700 x 1410 1260 x 805 x 1998 |
Capacity | 1125ℓ |
Refrigerator Non-CFC | 1 / 2 HP |
Defrost Heater | 300W Stable temperature during defrost cycle |
Epoxy powder coated Wire Shelf | 12 EA |
Controller | Microprocessor PID Program Controller with Battery back up system |
Display | 4 Digit LED Display & LED signal lamps |
Temperature | 2°C to 10°C Set Accuracy ±0.1°C / Uniformity ±1°C at 4°C |
Temperature Alarm | Set High Limit & Low limit temperature, Audible and Visible Alarm |
Material Interior Exterior | Stainless Steel Epoxy powder coated EGI steel |
Door | Vacuum Sealed Pair Glass Swing Door : Invisible heat film embedded, Key locker, Adjustable tension spring, Magnetic Packing door |
Air Circulation | Turbo Fan with automatic stop / run during door open |
Safety | High/Low Temp. Protector, ELCB, Thermal Protector |
Electric Supply | 110V 60Hz or 220V/230V 50/60Hz |
