Digital Tap Density Tester TR-HY-100A

Digital Tap Density Tester TR-HY-100A

Harga: CALL US

TR-HY-100A

Digital Tap Density Tester

TR-HY-100A is designed to replace the bulky, troublesome and expensive models in the market. TR-HY-100A had been designed to measure tapped density of powders, granules and similar products in accordance with USP method I and also method II, ASTM and relevant chapters of other pharmacopoeias. The technique is useful in powder flowability studies and also determining the amount of settlement during transit to optimize pack sizes.

Specifications

Density Tester
Model No.	HY-100 A (Saluran Tunggal)
berat sampel:	≤ 500g
sampel volume:	≤ 250 ml (25/50/100 ml/250 ml)
tunggal getaran No:	≤ 99999 (Kesalahan kurang dari 1 dari 10000.
torsi Motor:	0.86 N. m.
frekuensi:	Max. 300 rpm/min (terus menerus disesuaikan dalam 0-300 rpm)
amplitudo:	maksimum 15mm (1mm ~ 15mm variabel integer)
Repeatability:	≤ 1%.
akurasi:	≤ 1%.
kelembaban relatif:	kurang dari 85%, tanpa kondensasi.

Harga: CALL US

TR-HY-100A

Digital Tap Density Tester

TR-HY-100A is designed to replace the bulky, troublesome and expensive models in the market. TR-HY-100A had been designed to measure tapped density of powders, granules and similar products in accordance with USP method I and also method II, ASTM and relevant chapters of other pharmacopoeias. The technique is useful in powder flowability studies and also determining the amount of settlement during transit to optimize pack sizes.

Specifications

Density Tester
Model No.	HY-100 A (Saluran Tunggal)
berat sampel:	≤ 500g
sampel volume:	≤ 250 ml (25/50/100 ml/250 ml)
tunggal getaran No:	≤ 99999 (Kesalahan kurang dari 1 dari 10000.
torsi Motor:	0.86 N. m.
frekuensi:	Max. 300 rpm/min (terus menerus disesuaikan dalam 0-300 rpm)
amplitudo:	maksimum 15mm (1mm ~ 15mm variabel integer)
Repeatability:	≤ 1%.
akurasi:	≤ 1%.
kelembaban relatif:	kurang dari 85%, tanpa kondensasi.

Solidifying Point Tester

Solidifying Point Tester

Rp72.9Jt-97.2Jt

Model: SYD-510G-I 

PRODUCT OVERVIEW

The instrument is designed and made as per standards GB/T510 Test Method for Solidifying Point of Petroleum Oils, SH/T0248 Diesel and domestic heating fuels- Determinaiton of cold filter plugging point. It is suitable to determine solidifying point and cold filter plugging point of petroleum products.

PRODUCT SPECIFICATION

I. Main technical features

1. The material of workbench is stainless steel. It has two cold baths in one chamber. The cold baths are equal in temperature.
2. It adopts a new type compressor and advanced digital temperature controller. The coolig rate is fast and efficiency is high. The temperature in cold bath is uniform and it can reach -70℃.The accuracy can reach ±0.5℃.
3. The instrument adopts desk type structure. The design is simple and easy to use. The filter for cold filter plugging point is provided. Operator can do both solidifying point test and cold filter plugging point test as long as buying this instrument.

II. Main technical specifications

1. 1. Power supply : AC 220 V±10%, 50 Hz;
2. Temperature controll range of cold chamber:  
1. Two baths in one chamber. 
2. Room temperature: ~ -70 ℃, ±0.5 ℃, the temperatures of two baths are equal.
3. Refrigeration system : Refrigeration compressor 
4. Ambient temperature : ≤30 ℃
5. Relative humidity : ≤85%
6. Maximum power consumption : 1000 W
7. Dimension : 620mm×460mm×355mm

Rp72.9Jt-97.2Jt

Model: SYD-510G-I 

PRODUCT OVERVIEW

The instrument is designed and made as per standards GB/T510 Test Method for Solidifying Point of Petroleum Oils, SH/T0248 Diesel and domestic heating fuels- Determinaiton of cold filter plugging point. It is suitable to determine solidifying point and cold filter plugging point of petroleum products.

PRODUCT SPECIFICATION

I. Main technical features

1. The material of workbench is stainless steel. It has two cold baths in one chamber. The cold baths are equal in temperature.
2. It adopts a new type compressor and advanced digital temperature controller. The coolig rate is fast and efficiency is high. The temperature in cold bath is uniform and it can reach -70℃.The accuracy can reach ±0.5℃.
3. The instrument adopts desk type structure. The design is simple and easy to use. The filter for cold filter plugging point is provided. Operator can do both solidifying point test and cold filter plugging point test as long as buying this instrument.

II. Main technical specifications

1. 1. Power supply : AC 220 V±10%, 50 Hz;
2. Temperature controll range of cold chamber:  
1. Two baths in one chamber. 
2. Room temperature: ~ -70 ℃, ±0.5 ℃, the temperatures of two baths are equal.
3. Refrigeration system : Refrigeration compressor 
4. Ambient temperature : ≤30 ℃
5. Relative humidity : ≤85%
6. Maximum power consumption : 1000 W
7. Dimension : 620mm×460mm×355mm