Digital Tap Density Tester TR-HY-100A

Digital Tap Density Tester TR-HY-100A

Harga: CALL US

TR-HY-100A

Digital Tap Density Tester

TR-HY-100A is designed to replace the bulky, troublesome and expensive models in the market. TR-HY-100A had been designed to measure tapped density of powders, granules and similar products in accordance with USP method I and also method II, ASTM and relevant chapters of other pharmacopoeias. The technique is useful in powder flowability studies and also determining the amount of settlement during transit to optimize pack sizes.

Specifications

Density Tester
Model No.	HY-100 A (Saluran Tunggal)
berat sampel:	≤ 500g
sampel volume:	≤ 250 ml (25/50/100 ml/250 ml)
tunggal getaran No:	≤ 99999 (Kesalahan kurang dari 1 dari 10000.
torsi Motor:	0.86 N. m.
frekuensi:	Max. 300 rpm/min (terus menerus disesuaikan dalam 0-300 rpm)
amplitudo:	maksimum 15mm (1mm ~ 15mm variabel integer)
Repeatability:	≤ 1%.
akurasi:	≤ 1%.
kelembaban relatif:	kurang dari 85%, tanpa kondensasi.

Harga: CALL US

TR-HY-100A

Digital Tap Density Tester

TR-HY-100A is designed to replace the bulky, troublesome and expensive models in the market. TR-HY-100A had been designed to measure tapped density of powders, granules and similar products in accordance with USP method I and also method II, ASTM and relevant chapters of other pharmacopoeias. The technique is useful in powder flowability studies and also determining the amount of settlement during transit to optimize pack sizes.

Specifications

Density Tester
Model No.	HY-100 A (Saluran Tunggal)
berat sampel:	≤ 500g
sampel volume:	≤ 250 ml (25/50/100 ml/250 ml)
tunggal getaran No:	≤ 99999 (Kesalahan kurang dari 1 dari 10000.
torsi Motor:	0.86 N. m.
frekuensi:	Max. 300 rpm/min (terus menerus disesuaikan dalam 0-300 rpm)
amplitudo:	maksimum 15mm (1mm ~ 15mm variabel integer)
Repeatability:	≤ 1%.
akurasi:	≤ 1%.
kelembaban relatif:	kurang dari 85%, tanpa kondensasi.

Electronic Brinell Hardness Tester

Electronic Brinell Hardness Tester

Electronic Brinell Hardness Tester

Product Description:

1. Brinell hardness test is mainly used in hardness measurement for cast iron, steel products, nonferrous metals and soft alloys, etc. Besides it can be also used in hardness measurement for some non-ferrous materials, such as plastics, bakelite, etc.
2. Brinell hardness test is to use a steel ball of a certain diameter to press on the substance surface to be tested with specified test force. Through the specific time of holding test force, remove it and measure impression diameter of test piece surface with reading microscope.It is Brinell hardness value to calculate average pressure (N/mm2) of the spherical area to be beard in steel ball impression Brinell hardness value.

Technical Parameter:

A. TESTING FORCE

• 612.9N(62.5kgf)         4900N(500kgf)
• 980N(100kgf)           7355N(750kgf)
• 1226N(125kgf)          9800N(1000kgf)
• 1839N(187.5kgf)        14700N(1500kgf)
• 2452N(250kgf)          29400N(3000kgf)

1. Hardness Value Range In Measure:8~650HBW
2. Enlargement Factor Of Reading Microscope：20 times
3. Minimum Division Value Of Micrometer Drum Wheel:0.005mm
4. Maximum height of Sample:220mm
5. Distance From Indenter’s Center To Outer Wall：135mm
6. Power Source:AC220V/50~60HZ
7. Overall Dimension (L×W×H:（753*542*205）mm
8. Main Body Weight130 kG

ACCESSORIES

φ2.5、φ5、φ10mm steel ball indenter		1pc(each)
Big ,small plane testing   table, “V” testing table		1pc(each)
Standard hardness test   block
HBW10/3000	(150～250)	1pc
HBW5/750	(150～250)	1pc
Spare Fuse(2A)		2pcs
Power cord		1pc
Usage instruction manual		1copy
20x reading microscope		1copy
Dust-proof Plastic bag		1pc
Brinell hardness control table		1pc

INDICATING VALUE PRECISION

standard hardness test block	Max error of indicating value%	Max allowable variation in indicating value%
≤125	±3	3
125<HBW≤225	±2.5	2.5
＞225	±2	2

Electronic Brinell Hardness Tester

Product Description:

1. Brinell hardness test is mainly used in hardness measurement for cast iron, steel products, nonferrous metals and soft alloys, etc. Besides it can be also used in hardness measurement for some non-ferrous materials, such as plastics, bakelite, etc.
2. Brinell hardness test is to use a steel ball of a certain diameter to press on the substance surface to be tested with specified test force. Through the specific time of holding test force, remove it and measure impression diameter of test piece surface with reading microscope.It is Brinell hardness value to calculate average pressure (N/mm2) of the spherical area to be beard in steel ball impression Brinell hardness value.

Technical Parameter:

A. TESTING FORCE

• 612.9N(62.5kgf)         4900N(500kgf)
• 980N(100kgf)           7355N(750kgf)
• 1226N(125kgf)          9800N(1000kgf)
• 1839N(187.5kgf)        14700N(1500kgf)
• 2452N(250kgf)          29400N(3000kgf)

1. Hardness Value Range In Measure:8~650HBW
2. Enlargement Factor Of Reading Microscope：20 times
3. Minimum Division Value Of Micrometer Drum Wheel:0.005mm
4. Maximum height of Sample:220mm
5. Distance From Indenter’s Center To Outer Wall：135mm
6. Power Source:AC220V/50~60HZ
7. Overall Dimension (L×W×H:（753*542*205）mm
8. Main Body Weight130 kG

ACCESSORIES

φ2.5、φ5、φ10mm steel ball indenter		1pc(each)
Big ,small plane testing   table, “V” testing table		1pc(each)
Standard hardness test   block
HBW10/3000	(150～250)	1pc
HBW5/750	(150～250)	1pc
Spare Fuse(2A)		2pcs
Power cord		1pc
Usage instruction manual		1copy
20x reading microscope		1copy
Dust-proof Plastic bag		1pc
Brinell hardness control table		1pc

INDICATING VALUE PRECISION

standard hardness test block	Max error of indicating value%	Max allowable variation in indicating value%
≤125	±3	3
125<HBW≤225	±2.5	2.5
＞225	±2	2

Rockwell Hardness Tester

Rockwell Hardness Tester

Hardness Tester-TR-150

Overview:

1. Hardness is one of the important mechanic characteristics of the material while the hardness testing is an important method to judge the quality of the metal material or its component parts.The hardness of the metal is correspondent to its other mechanic characteristics, and so its mechanic characteristics such as the strength, tiredness, wriggling and wearing out can be tested out approximately through its hardness testing.
2. The Digital Rockwell Hardness Tester is equipped with a newly-designed large displaying screen with good reliability, excellent operation and easy watching, thus it is a high-tech product combining the mechanic and electric features. Its main function is as follows:

• The Selection of Rockwell Hardness Scales
• The Selection of Plastic Rockwell Hardness Scale (The special requirements will be met according to the supply contract)
• The hardness values exchange among various Hardness Scales;
• The Output-Printing of hardness testing results;
• The RS-232 Hyper Terminal Setting for the Functional Expansion by the client.

Technical Parameter

No.	Description of Goods	Quantity
1	Diamond Rockwell Indenter	1   PC
2	ф1.5875mm ball Indenter	1   PC
3	Testing Table (Big, Middle, "V"-Shaped)	TOTAL   3 PCS
4	Standard Rockwell Hardness Block
5	HRB,HRC (High, Lower)	TOTAL   3 PCS
6	Fuse 2A	2   PC
7	Power Cable	1   PC
8	Weight A,B,C	TOTAL   3 PCS
9	Level	1   PC
10	Horizontal Regulating Screws	4 PCS
11	Screwdriver	1   PC
12	Spanner	1 PC
13	Usage Instruction Manual	1   PC
14	Anti-dust Nylon bag	1   PC

Hardness Tester-TR-150

Overview:

1. Hardness is one of the important mechanic characteristics of the material while the hardness testing is an important method to judge the quality of the metal material or its component parts.The hardness of the metal is correspondent to its other mechanic characteristics, and so its mechanic characteristics such as the strength, tiredness, wriggling and wearing out can be tested out approximately through its hardness testing.
2. The Digital Rockwell Hardness Tester is equipped with a newly-designed large displaying screen with good reliability, excellent operation and easy watching, thus it is a high-tech product combining the mechanic and electric features. Its main function is as follows:

• The Selection of Rockwell Hardness Scales
• The Selection of Plastic Rockwell Hardness Scale (The special requirements will be met according to the supply contract)
• The hardness values exchange among various Hardness Scales;
• The Output-Printing of hardness testing results;
• The RS-232 Hyper Terminal Setting for the Functional Expansion by the client.

Technical Parameter

No.	Description of Goods	Quantity
1	Diamond Rockwell Indenter	1   PC
2	ф1.5875mm ball Indenter	1   PC
3	Testing Table (Big, Middle, "V"-Shaped)	TOTAL   3 PCS
4	Standard Rockwell Hardness Block
5	HRB,HRC (High, Lower)	TOTAL   3 PCS
6	Fuse 2A	2   PC
7	Power Cable	1   PC
8	Weight A,B,C	TOTAL   3 PCS
9	Level	1   PC
10	Horizontal Regulating Screws	4 PCS
11	Screwdriver	1   PC
12	Spanner	1 PC
13	Usage Instruction Manual	1   PC
14	Anti-dust Nylon bag	1   PC